Home > Sterilizers > Steam Autoclaves > Large Capacity Autoclaves >

Refurbished Market Forge Sterilmatic STM-E Steam Sterilizer

Name: Duraline Systems Inc Sterilizer & Autoclave Repair Sales Service-West Nyack
Rating: 4.8 (18 reviews)

Refurbished Market Forge Sterilematic STM-E

Refurbished OEM 95-2678

Price: $7,930.00

Price with Selected Options: $7,930.00

FREE SHIPPING

Availability: In Stock
Product Code: RSTME

NEW chamber

Yes [Add $8,500.00]
No

Add Stand

Yes [Add $1,541.85]
No (6" feet)

Add Recording Thermometer

120V [Add $3,476.00]
230V [Add $3,932.00]

Plug

Yes [Add $79.00]
No (hard-wired)

Electrical Options

Parts & Labor Warranty

Qty:

Description

Technical Specs

Literature

Market Forge STM-E Analog Sterilmatic Steam Autoclave Sterilizer Refurbished

WARRANTY: 6 months parts only

The Largest Capacity in the most compact space! Small on the outside, the Sterilmatics has as much inside capacity as many large, more costly conventional sterilizers and up to five times the capacity of smaller table top units.

Economical, reliable and simple to operate, the versatile Sterilmatics provides the highest standards of sterilizing performance in a number of facilities, such as, Laboratories, Veterinary Clinics, Food Processing Plants, Wineries, Fisheries, Dairy Processing Plants, and more.

Sterilize glass beakers, pipettes, test tubes and flasks. Metal and plastic instruments, syringes, needles, brushes, rubber gloves, catheters, rubber tubing, dressings, linens, petri dishes and more.

Standard Features:

Automatic temperature controls
Temperature up to 250°F (121°C)
Thermostatic steam trap
Thermometer range 180°-300°F (82°-149°C)
0-30 lb. steam gauge
0-60 minute timer
Low water cut-off, signal light, and safety valve
Flat perforated steam baffle
Removable pan supports
18-3/4” wide x 27-5/8” high x 31” deep (55-1/4” high on optional stand)

Options & Accessories:

Product Code	Description	OEM	Price
MF1018A-AM	12' x 20' x 2' Perforated Tray (Unit will holds three of this size)	Replaces 10-1203	$107
MF1018B-AM	12" x 20" x 4" Perforated Tray (Unit will hold (2) of these, as well as (1) 2-1/2" tray)	Replaces 10-1204	$134
MF1018C-AM	12" x 20" x 6" Perforated Tray (Unit holds (1) of these, as well as (1) 2-1/2" tray)	Replaces 10-1205	$206
MF1018D	12" x 20" x 2-1/2" Wire Basket	10-1228	$392
MF1018E	12" x 20" x 4" - Wire Basket	10-1229	$406
MF1076	Exhaust Condenser (can't be connected to outside vent)	95-0436	$2,575
MF1077	Exhaust Condenser 240V, 50/60 Hz	95-3629	$3,348
MF1021	Spare Parts Kit (STM-E & STM-EL Models)	95-6061	$1,441
MF1022	Spare Parts Kit (STM-EX & STM-ELX Models)	95-6062	$2,185
MF1000	New Chamber Cylinder Kit Buy refurbished with NEW chamber!	98-4217	$13,320
MF1016	Recording Thermometer 120V / 60 Hz	95-6233	$3,476
MF1023	Recording Thermometer 230V / 50Hz	95-6234	$3,932
MFSTAND	Stand 28" high. Includes 1 shelf.	95-6060	$2,256
MF1014	Extra Shelf (for stand MFSTAND)	95-6054	$729

Warranty: 6 months parts only
View Market Forge Options and Accessories

Features

Q. Can I use distilled water in Market Forge Sterilematic sterilizers?
A. No, distilled water is NOT recommended by the manufacturer. See Installation Page 2 of the operators manual

WATER CONDITIONS
When sterilizing culture mediums that generate sulfide gas or chlorine gas, the inside of the chamber must be cleaned and rinsed thoroughly without fail. Market Forge from time to time is asked the question about using distilled or deionized water for use with our Sterilizer models STM-E and STM-EL. We are always asked why these water choices are not allowed for use with our units and what would be recommended. To address this situation, we have complied the following as a means of satisfying these questions:
1. We have found that the use of distilled or deionized water will aggressively attack the pure coat of Aluminum Alclad, which protects the bottom surface from oxidizing and then eventually pitting (reference: Operating and Maintenance Instructions).
2. In addition pitting can also be caused by several other external environmental factors. Few examples are as follows. These conditions have been highlighted in our documentation.
• Grains of hardness in the water supply should be as follows (.25 to 2).
• A pH imbalance in the water supply can greatly affect the life to the aluminum cylinder. The pH range that would be recommended is between 7.0-8.5.
• The lack of a positive electrical ground can cause an electrolytic reaction that will accelerate pitting.
• Another contribution to accelerate pitting is the type of cleaning solutions used or the abrasive scrubbing pads. If a low pH is present with the detergents being used or an abrasive pad, the protective Alclad coating will be removed during the cleaning process.
• Spillage of media being sterilized can also contribute to the accelerated pitting if it is corrosive.
• CHLORINE LEVEL ≤ 1 PPM.