Sale on ALL Autoclave Door Gaskets! Use the Code: DG1016 for 20% Off!

Services Offered

Validation Service
Why do I need a Validation Service? Often times we see autoclaves or a water distilling machine that have serious electrical hazards even though it is working fine. Even more commonly we see autoclaves that are not even meeting the sterilization parameters due to loss of calibration, defective steam traps and bellows valves that the customer knew nothing about. Just remember, indicator strips are not proof of sterilization!

Our Validation Service includes:

  • Electrical Safety Check
  • 20 Point Inspection
  • Spore Test
  • Service Report Documentation
  • Inspections Sticker
  • Validation Certification


Preventive Maintenance Service
Why do I need a PM Service? Sterilizer Maintenance is crucial to the longevity and reliability of your sterilizer. We see sterilizers in our shop every day that need costly repairs that easily could have been avoided. Worn gaskets, clogged filters and leaking valves are usually the cause of catastrophic failure with autoclaves. The cost of this annual service is minimal compared to the cost of emergency sterilizer repair service and down time at your facility. If your autoclave is used very heavily we would recommend this service bi-annually.

Our Preventive Maintenance Service includes:

  • Validation Service
  • Perform Complete Cleaning
  • Clean & Check all Filters, Sensors, Seals and Valves
  • Replace Worn Parts as need 
  • Test & Verify Calibration
  • 10 Point Mechanical Inspection
  • 90 Day Labor Warranty


Refurbishing Service
What does it mean to refurbish an autoclave?
Unfortunately there is no definitive answer and therefore not everyone creates refurbished autoclaves equally! Through years of experience, Duraline has raised the bar for refurbished equipment and is a leader in producing quality refurbished sterilizers in a consistent manor. At Duraline, every refurbished autoclave must meet or exceed OEM specifications, look like new and pass a 30 Point Quality Control Inspection. That’s why we can confidently back our equipment with a 30 Day Satisfaction Guarantee and 6 Month Parts & Labor Warranty!

During Refurbishing Maintenance Service, we:

  • Disassemble and clean entire unit
  • Recondition Chamber & Reservoir
  • Replace all Wear & Tear Parts
  • Test all Major Components & Replace if necessary
  • Sand Blast & Repaint Cover and Frame as needed
  • Perform Full Calibration
  • 30 Point Quality Control Inspection
  • 6 Month Parts & Labor Warranty

Contact us for more information