Skip to content
Clean to Sterile Solutions
What Sets Us Apart
The StopLight Effect
Red: Deposit Waste Supplies
Yellow: Cleaning to Packaging
Green: Sterilization to Storage
Instrument Lubricants, Trays & Cleaning Brushes
High Level Disinfectant Sterilant & Monitoring
Ultrasonics by Brand
Ultrasonic Cleaner Accessories
Ultrasonic Cleaner Monitors
SALE The Perfect Pair $600 Rebate
Washers Disinfectors Accessories
Rinse Agents & Detergents
Labeling & Storage
Labelex Labels & Dispensers
C.I. Tape and Dispenser
Sterilization Tubing & Sealers
SteriLine Sterilization Centers
Automatic Tabletop Autoclaves
Manual Tabletop Autoclaves
Large Capacity Autoclaves
Class B Pre Post Vac
20% Off Refurbished Sterilizers
The Perfect Pair $600 Rebate
Tuttnauer $450 Rebate
UV Decontamination Chamber
Dry Heat Sterilizers
Ethylene Oxide (EtO)
PCD's for Monitoring Sterilizers
Sterilizer Printers, Ribbons, SteriData Loggers
Services & Repairs
COVID-19 Disinfecting Service
Rent Autoclave / Equipment Rental
Lease Autoclave / Equipment Financing
DuraCleanse Soap &
Dispensers & Stands
Hand Sanitizer, Hand Wipes, Hand Soap
Respirators & PAPR
Multi-Purpose Alcohol Wipes
Germicidal Instrument Cleaner
Decontamination for N95 Masks
COVID-19 Disinfecting Service
COVID-19 Prevention Stations
UV Disinfection Solutions
PAPR vs. N95
COVID-19 Posters & Resources
RapidHeat RH-N95 Decontamination System
FDA Approved to Decontaminate N95 Respirator Masks for multiple uses
3-5 working days from receipt of order, not in stock
RH-N95 Decontamination System: Decontaminates N95 Respirator Masks for multiple uses (tested to 20 cycles).
This unit ships within 3-5 working days from receipt of order, not in stock.
WARRANTY: 3 years parts and labor
Helping our medical professionals fight COVID-19
High Velocity Hot Air RapidHeat R
H-N95 provides a fast,
effective method of
decontaminating N95 masks without
compromising mask performance –
Up to 100 masks per hour. Through the convenience of on-site reprocessing of used N95 masks using the tabletop RapidHeat RH-N95, healthcare facilities can achieve required level of viral kill, while maintaining mask performance and function.
On-site decontamination will assure
that personnel can receive their
previously used mask. Units can be
installed in departments, floor, units
or wings of healthcare facilities.
Low Temperature at 155°F
No Chemicals or Water Required
No Drying or Aeration
Easy Touch Screen Operation
Peer review literature research
has documented that the RH-N95 can meet or exceed a 6Log reduction of Coronavirus (or its surrogate) and that of Mycobacterium while assuring respirator performance for multiple use. Manufactured by CPAC Environmental Solutions.
The RH-N95 Decontamination System
meets the criteria for market clearance
contained in FDA’s March 2020 guidance document.
RapidHeat RH-N95 Advantages for decontaminating N95 masks:
Preferred decontamination process
(Stanford Report, March, 2020
that provides documented evidence of maintaining filtration and breathability performance (no electrostatic charge reduction in melt-blown fibers used as viral filtration fabric)
Meets or exceeds published (peer-reviewed) > 6 Log10 reduction requirements for coronavirus and Mycobacterium to assure coronavirus kill and that of other non-spore pathogens as well
Meets FDA criteria to market device for coronavirus decontamination under FDA’s emergency authorization
Dedicated unit for the re-processing of N95 respirators/masks
Requires no water in its operation
Requires only 110-115V or 220-240V electric service
No ancillary chemical or other treatment or supply products required
No drying time required after treatment; masks are cool to the touch in seconds after their removal from the unit and ready for immediate re-use
No residues to evacuate from treated masks after treatment; no worry about lingering toxic, chemical residues to sensitive nasal passages, facial skin, and other respiratory passages
Ability to monitor decontamination parameters (time-temperature). Other non-thermal processes have no method to measure chemical concentrations at site of required kill
No deformation in mask structure or change in filtration/breathability performance for atleast twenty (20) re-use cycles
Low cost for RH-95 Mask Re-Processor (~ $7000)
Multi-purpose unit that functions as N95 mask re-processor, but can be simply re-programed via USB port to be used as a medical/dental sterilizer (FDA-cleared) post-pandemic
Countertop unit with small footprint at 11” (279mm)W x 17.75” (433mm)D x 11.75” (299mm)H which can be placed almost anywhere electrical service is available
Large rectangular decontamination chamber volume: 2294 cubic inches (10 gal/38 liters)
Stainless steel construction
TUV, UL, CE – approved
Four-tray configuration allowing approximately 100 masks to be processed per hour
Direct time-temperature documentation at mask location to ensure decontamination conditions are met (68°C, 155°F; 30 minutes) via an autonomous time-temperature sensor; replaces the need for chemical indicators
Offers point-of-use mask decontamination to serve need on ships, on med-evac aircraft, for field operations, and within hospital wings/floors/departments
Overall Dimensions: 22.5" W x 22.5" D x 19.5" H (572 mm x 572 mm x 495 mm)
Chamber: 11”W x 17.75”D x 11.75”H (279mm x 433mm x 299mm)
Weight: 75 lbs (34 kg)
Instrument Tray: 9”W x 15”D x 1”H (229mm x 381mm x 28mm)
Electrical: 110-120V, 60Hz, 1400 Watts warm up, 300 Watts operating
220-240V, 50Hz, 1400 Watts warm up, 300 Watts operating
Sterilization Temperature: 155º Fahrenheit (68º Celsius)
Warranty: 3 years parts and labor
DECONTAMINATING N95 MASKS USING RAPIDHEAT TECHNOLOGY
CPAC Equipment, Inc. (CPAC) is an FDA registered New York manufacturing company (www.cpac.com) that has recently responded to the COVID-19 Public Health Emergency and the emerging reuse of N95 Respirator Masks by repurposing their FDA-Cleared tabletop sterilizers to decontaminate certain identified used N95 Respirator Masks. Under the Emergency Use Authorization (EAU) granted to manufacturers by the FDA, CPAC has modified the functionality of its RapidHeat RH-Pro11 sterilizer to decontaminate used N95 masks. Research of peer reviewed studies from the last SARS -coronavirus (2002-2003) confirmed that CPAC ‘s RapidHeat High-Velocity Hot Air (HVHA) technology would be the ideal vehicle for decontaminating identified used N95 Respirator Masks through a modification of its software and time/temperature profile.
CPAC’s FDA-Cleared RH-Pro11 Sterilizer has been repurposed to decontaminate N95 Masks.
FDA’s “Emergency Authorized Use” allows FDA-Cleared Devices to Modify Functionality.
The RH-N95 System was engineered to Decontaminate (kill) Viruses and Bacteria (not spores).
CPAC has successfully researched and tested a number of popular quality N95 Respiratory Masks.
Research has proven that repeated thermal cycles do not damage “N95 Fit and Filtration”.
N95 Masks made of Polypropylene Thermoplastic Fabric are proven to withstand over 300° F.
CPAC’s RH-N95 System temperature uses heating technology that is stable and uniform.
RH-N95 System uses State-of-the-art Software to Control time and temperature.
RH-N95 Cycles are calibrated to maintain a time/temperature profile of 68° C. for 30 minutes.
Peer-reviewed studies have provided the criteria for achieving mask decontamination.
RH-N95 RapidHeat Technology protocol allows Masks to be returned to the original user.
The RH-N95 DOES NOT Sterilize – It “inactivates” vegetative microorganisms to a level of ≥6Logs.
CPAC’s decontamination chamber is a closed system; air going in with door open is air from ambient environment. Ambient environmental air in hospitals is required to be 40-60% relative humidity. Therefore, air in the chamber is an average 50% humidity which is favorable for viral kill under the RH-N95 time and temperature parameters of 68 degrees C for 30 minutes. The mass of air and moisture content entering the chamber before the door is closed remains the same mass during the decontamination process.
IMPORTANT: Healthcare Practitioners should contact CPAC to determine if their N95 Masks have been tested for maintaining their integrity and functionality using the RH-N95 Decontamination System. There are low quality masks manufactured by some companies using inexpensive non-durable construction that may not survive under the reprocessing temperatures of the RH-N95.
RapidHeat RH-N95 Decontamination System Brochure
High Velocity Hot Air RapidHeat RH-N95 Decontamination Study
RapidHeat RH-N95 Decontamination System FDA Authority: Permitted use of the RH-N95 for N95 Respirator Disinfection under FDA Emergency Authority
Share your knowledge of this product.
Be the first to write a review »