P100 Filters for Elipse P100 Source Control Respirator Mask, 10 per pack
Couldn't load pickup availability
Filtration Technology HESPA®
HESPA mechanical filters capture particles like a net and efficiency is not affected by time and humidity. The membrane technology used in Elipse filters allow a protection for nanoparticles to the size of 0,04 micron, still to 99,99% efficiency.
Note: Filter must be changed when breathing becomes hard.
How to clean HESPA P100 filters:
- Vapored Hydrogen Peroxide: manufacturer recommends a maximum of 10 cycles for the filters
- UVC light: at 253.7 wave length - manufacturers recommend a maximum of 10 cycles for the filters
- Materials: Mechanical type multi-layer HESPA Synthetic media with TPE flexible overmolded / encapsulated
- Filters are re-usable and changeable
- Weight: net 0.63 oz each; both net 1.26 oz, gross 2.08 oz
A. Good question! There is a valve on the front, as you see, but it is covered to block airflow in or out of the mask.
Q. Why is this important?
A. The exhalation valve is covered to prevent a user that is sick but Asymptomatic from exhaling air onto a patient. This is very important with the onset of coronavirus and has been a primary concern with PPE in hospitals.
Q. If the exhalation valve is covered, and mask fits the contours of my face, then how do I get air?
A. In the Elipse P100 respirator, when you inhale, air is captured on the front of the filter and when you exhale, air travels out of the filter.
Q. How many filters are in the Elipse P100 Respirator?
A. 2
Q. How frequently do I change the filters?
A. There is no required length of time to change filters; it is up to the users preference. Our customer feedback ranges anywhere from 2-4 weeks (healthcare industry). Filters can be disinfected and sterilized in a steam autoclave for up to 10 cycles! So the filters are reusable too. Contact Duraline for more information on cleaning and sterilizing your Elipse P100 and filters
Q. Where can I buy filters? Can it be any filter?
A. Replacement filters must be specific to the Elipse P100. These are available for purchase on Duraline Systems - call us to set up AutoShip and receive discounts at 1-877-561-0500 or email us
Accessories
Elipse P100 Source Control Respirator Mask with replaceable filters, no exhalation valve
Choose your option
Discover more in our FAQ
Shoot our team an email & we’ll get back to you ASAP
How do I look up disinfectant on List N?
How do I look up disinfectant on List N?
First, find the product registration number. This can be found on the product label or safety data sheet. Duraline posts most registrations in the Product Description field of the product page in our website. Second, go to the epa.gov website: https://cfpub.epa.gov/giwiz/disinfectants/index.c... and enter the first 2 parts of the registration number and click enter.
My product has 3 parts on the registration number and I can't find all 3 on the approved website for List N. Why?
My product has 3 parts on the registration number and I can't find all 3 on the approved website for List N. Why?
The first 2 parts of the EPA Registration Number are the primary numbers and represent the primary registration. Since different companies sell products with the same chemical composition and efficiency, only 1 brand or product name receives the primary number. The third part represents the distributor of the primary registration and is still on List N and is proven effective against SARS-CoV-2 (COVID-19).
I can't find Swovo disinfectant wipes on List N. Where is it?
I can't find Swovo disinfectant wipes on List N. Where is it?
The EPA Registration number for Swovo is 59894-10-98425
To find this on the epa.gov website, you only need to enter the first 2 parts of this number, "59894-10"
This primary registration number is on the list, and so it is approved! See screenshot below.