Skip to content
IMMEDIATE DELIVERY & INSTALLATION OF STERILIZERS IN FIELD HOSPITALS FOR COVID-19
Clean to Sterile Solutions
What Sets Us Apart
The StopLight Effect
Red: Deposit Waste Supplies
Yellow: Cleaning to Packaging
Green: Sterilization to Storage
Infectious Waste Bags
High Level Disinfectant Sterilant & Monitoring
Instrument Lubricants, Trays & Cleaning Brushes
Ultrasonic Cleaning Equipment
Baskets & Accessories
Washers Disinfectors & Monitors
Rinse Agents and Detergents
Washers Disinfectors Accessories
Labeling & Storage
Labelex Labels & Dispensers
C.I. Tape and Dispenser
Sterilization Tubing & Sealers
Sterilizers for N95 Masks
Automatic Tabletop Autoclaves
Manual Tabletop Autoclaves
Large Capacity Autoclaves
Class B Pre Post Vac
Dry Heat Sterilizers
Ethylene Oxide (EtO)
PCD's for Monitoring Sterilizers
Sterilizer Printers, Ribbons, SteriData Loggers
SteriLine Sterilization Centers
Services & Repairs
Manual Tabletop Autoclaves
Refurbished Ritter Midmark M7 Speedclave, Previous Model
Sale Price: $
New Style - $1,799
Old Style - $1,699
Refurbished Midmark Ritter M7 Speedclave Autoclave, Previous Model
WARRANTY: 6 months parts and labor
Over 40 years in the field, the Midmark M7 has proven to be the workhorse of sterilizers. This self-contained unit sterilizes wrapped or unwrapped instruments, linen packs and glassware. Starting hot, the M7 sterilizes unwrapped instruments in only 9 minutes. Economically priced, this sterilizer is the best product for your money.
The refurbished Midmark Ritter M7 Speedclave autoclave has a saftey door, which automatically seals when pressureized and will not allow the operator to open the door until the chamber is safely depressurized.
The temperature regulator allows the operator to preset the temperature at a desired setting between 250° F (121°C) and 270°F (132°C). This control, acting as a thermostat, cycles the heating element on and off.
The temperature gauge indicates the temperature inside the chamber. The gauge is graduated in 2-degree increments.
The unit comes with a low-water cut-out switch, which prevents "dry burning". The M7 will only operate when there is enough water present, which prolongs the life of the heating element. A pilot light is on when the heater is on, and cycles on and off during normal operation.
A cycle timer regulates sterilization time from 0 to 30 minutes and automatically turns the M7 off when the sterilization cycle is complete. This prevents over-sterilization thus extending the service life of your instruments.
6-month parts and labor warranty for all refurbished autoclaves
7.5" x 15"
Dimensions (L x W x H):
19" x 14" x 13"
Trays: 3 (2 large and 1 small)
Tray Size (L x W x H):
Small: 12" x 4-1/8" x 7/8" / Large: 12" x 5-5/8" x 7/8"
Standard Unwrapped Cycle Time: 3 minutes (does not include heat up or cool down time)
Total Sterilization Time (does nto include drying)
*Exposure Time: total time required for sterilization of the load. This period begins when the sterilizer reaches the sterilization temperature and does not include the time it takes to reach sterilization temperature and the time it takes to cool down.
Ritter Midmark M7 Speedclave Operators Manual
How to Care for your Midmark M7 Ritter Speedclave
Share your knowledge of this product.
Be the first to write a review »