New Midmark M9 Ultraclave Autoclave Midmark M9-050
Couldn't load pickup availability
Four stainless steel trays—two large and two small—to accommodate various instruments.
The Midmark M9-050 Gen 5 Steam Sterilizer combines a sleek, modern design with upgraded capabilities that enhance functionality and performance. Its advanced touchscreen interface, streamlined compliance recordkeeping, and enhanced durability provide an efficient and reliable sterilization solution for modern medical and dental practices.
- Intuitive 5-Inch Touchscreen: The fingerprint-resistant touchscreen supports gloved operation and offers light and dark display modes. Pre-programmed cycles, real-time alerts, and a large cycle-countdown clock support quick, confident operation.
- Streamlined Compliance Recordkeeping: Automated cycle recordkeeping, user authentication, and unlimited storage of routine care events help reduce transcription and documentation errors while keeping the sterilizer audit ready.
- Enhanced Durability: The reengineered chamber increases the sterilizer’s expected operating life to 25,000 cycles and reduces required service frequency by more than half.
- Improved Cycle Monitoring: A color-coded LED light bar displays in-progress, complete, and error conditions from a distance. A cycle-countdown clock and audible cues support workflow management.
The Midmark M9 Steam Sterilizer uses a steam-flush pressure-pulse air-removal system to support proper steam sterilization. Pre-programmed cycles, touchscreen prompts, real-time alerts, and cycle-status indicators help simplify operation and notify users of critical system errors.
- Reconfigured sterilization cycle aligns with the FDA 4-minute cycle recommendation
- Additional heat during the drying phase improves drying capabilities
- Included pouch rack supports packaged instrument processing
- Low-water indicator identifies when the reservoir level is too low
- Door-ajar indicator identifies when the door is not securely closed
- Cycle display shows temperature during heat-up and remaining cycle time
- Progressive indicators display filling, heating, sterilizing, drying, and complete stages
- Front-access reservoir supports easier filling and draining
- Large-capacity water reservoir requires less frequent filling
- Includes four stainless steel trays: two large and two small
- Pressure gauge and electronic controls support straightforward operation
- Compatible with a quiet, easy-to-install thermal printer
- Meets the ANSI/AAMI ST55 testing standard
- USB Kit sold separately
- Chamber Size: 9" x 15" (22.9 x 38.1 cm)
- Volume: 6.5 gal (24.6 L)
- Dimensions (L x W x H): 20.5" x 15.8" x 16.6"
- Water Reservoir Capacity: 1.1 gal (4.1 L) to full mark & .6 gal (2.3 L) usable volume
- Trays: 4
- Tray Size: (Usable tray area)
- (2) Large: 7.3" x 12" x .9" (18.6 x 30.5 x 2.2 cm)
- (2) Small: 5.6" x 12" x .9" (14.3 x 30.5 x 2.2 cm)
- Pouch Rack: 5 Slot
- Voltage:
- 115 Vac, 12 Amp, 50/60 Hz
- 230 Vac,
- Frequency: 50/60
- Current: 15A
- Shipping Weight: 95 lbs.
- Minimum Countertop Area: 21.8" D x 26.5" W (55.4 x 63.7 cm)
User-Friendly Operation:
- Simply press the Start/Standby button, and the sterilizer automatically fills with the correct amount of water. Select your cycle, and the machine handles the rest, with cycle times of 28 minutes (cold) and 18 minutes (hot) for unwrapped instruments.
- Determine cycle status—cycle in progress, cycle complete, and cycle error—from a distance using the progressing color-coded LED light bar, audible cues, and visual indicators.
- The LED display provides clear information on the unit’s temperature during heat-up and the time remaining during cycles.
- The large capacity water reservoir reduces the frequency of refills. The water fill and drain are conveniently located at the front of the machine for easy access.
- A low water indicator light alerts you when the reservoir needs refilling.
- A door-ajar light notifies you if the door is not securely closed, ensuring safe operation.
M11-050 WARRANTY: 2-year parts only

