Home > Sterilizers > Steam Autoclaves > Automatic Tabletop Autoclaves >

New Midmark M9 Dental Steam Sterilizer M9-040

Midmark M9 Steam Sterilizer

Midmark M9-040

Availability: In Stock
Product Code: NMM9U

Description Technical Specs Literature
New Midmark M9 Steam Autoclave Sterilizer for dental use M9-040 (click here for Midmark Ritter M9-042 medical autoclave)

WARRANTY: 12 months parts only

Midmark has updated their steam sterilizers. The newest Midmark M9 autoclave model was recently released in 2019. The sleek, modern design is accompanied with upgraded capabilities, for better functionality and performance. The Midmark M9 has a 9" x 15" chamber and 3.5 gallons usable volume (13.4 Liters).

What's New?
  • midmark m11 printerReconfigured Sterilization Cycle: aligns to FDA 4-minute cycle recommendation
  • Improved Drying Capabilities: applies additional heat during drying phase. Includes pouch rack
  • Upgraded Printer (sold separately): Uses quiet, easy-to-install thermal printer
  • Updated Finish: presents a modern, attractive medical device finish
  • Advanced Compliance: meets ST55 testing standard

The Midmark M9 Steam Sterilizer is a popular choice among dentists. They are RELIABLE (steam-flush pressure pulse air removal system ensures proper steam sterilization), EASY-TO-USE (pre-programmed sterilization cycles and intuitive LCD display with prompts ensure quick, confident operation) and SAFE (real-time alerts notify users promptly of any critical system errors).

  • Low water indicator light tells you when the reservoir level is too low
  • A door-ajar light tells you if the door is not securely closed
  • LED display shows the units temperature during heat-up and time remaining during cycles.
  • Lights turn on progressively during filling, heating, sterilizing, drying and complete stages.
  • Easy to fill and to drain water - located at the front of the machine
  • A large capacity water reservoir means you fill it less often!
  • Four stainless steel trays come with the unit (two large, two small)
  • Easy-to-read pressure gauge and electronic controls offer simple operation and reduce down time

How does the Midmark M9 Steam Sterilizer work?
Just a few simple steps completes the process. Simply press the Start/Standby button and the Midmark M9 automatically fills with the correct amount of water. Select the cycle you want and the time is set for you. Cycle time from start to finish is 28 minutes (if cold) and 18 minutes (if hot) for unwrapped cycles.

Midmark M9-040 / M11-041 / M11-042
WARRANTY: 12 months parts only

Replacement Tray Set for Midmark M9 Midmark Door Gasket, M9 Midmark M9 Printer, Midmark M11 Printer
Price: $138.20

Price: $114.98

Price: $6,999.00

replacement-tray-set-for-midmark-m9 midmark-door-gasket-m9 New Printer for Midmark M9 Ultraclave, Ritter M9D, and Midmark Ritter M11 Ultraclave, M1219P

Share your knowledge of this product. Be the first to write a review »