Home > Brands >

New Ritter M11 Steam Sterilizer Autoclave M11-042


Ritter M11-040 / M11-041 / M11-042

Availability: In Stock
Product Code: NRM11

Description Technical Specs Literature
New Ritter M11 Steam Sterilizer Autoclave M11-042

WARRANTY: 12 months parts only

Midmark has updated their Ritter steam sterilizers. The newest Ritter M11 autoclave model was released September 2019. The sleek, modern design is accompanied with upgraded capabilities, for better functionality and performance. The Ritter M11 is one of the largest countertop sterilizers with a chamber size of 11" x 18" for larger packs and instruments.

What's New?
  • midmark m11 printerReconfigured Sterilization Cycle: aligns to FDA 4-minute cycle recommendation
  • Improved Drying Capabilities: applies additional heat during drying phase. Includes pouch rack
  • Upgraded Printer (sold separately): Uses quiet, easy-to-install thermal printer
  • Updated Finish: presents a modern, attractive medical device finish
  • Advanced Compliance: meets ST55 testing standard

The Ritter M11 Steam Sterilizer is a popular choice among dentists. They are RELIABLE (Steam–Flush Pressure Pulse Air Removal System ensures proper steam penetration), SIMPLE (Simply load it, set it and forget it) and CONVENIENT (Four pre-programmed and two programmable cycles).

  • Low water indicator light tells you when the reservoir level is too low
  • A door-ajar light tells you if the door is not securely closed
  • LED display shows the units temperature during heat-up and time remaining during cycles.
  • Lights turn on progressively during filling, heating, sterilizing, drying and complete stages.
  • Easy to fill and to drain water - located at the front of the machine
  • A large capacity water reservoir means you fill it less often!
  • Four stainless steel trays come with the unit (two large, two small)
  • Easy-to-read pressure gauge and electronic controls offer simple operation and reduce down time

How does the Ritter M11 Steam Sterilizer work?
Just a few simple steps completes the process. Simply press the Start/Standby button and the Midmark M11 automatically fills with the correct amount of water. Select the cycle you want and the time is set for you. Cycle time from start to finish is 28 minutes (if cold) and 18 minutes (if hot) for unwrapped cycles.

Ritter M11-042

Midmark M11 / M11D Door Gasket Midmark M9 Printer, Midmark M11 Printer Tray Set for Midmark M11 Ultraclave
Price: $111.61

Price: $795.00

Price: $249.00

Midmark-m11-door-gasket Midmark M9 Printer, Midmark M11 Printer tray-set-for-midmark-m11-ultraclave

Share your knowledge of this product. Be the first to write a review »