STAT-DRI™ Plus rinse agent improves drying time and extends the life of the STATIM seal.
OEM # 8OZPLUST
- For use on interior surfaces of Statim autoclave cassettes
- Coating remains on the cassette surface
- Daily applications are recommended to substantially reduce drying time, and extend the life of instruments
- Use this spray bottle with the 32 oz. refill bottle
Ideal for StatIM 200, 5000 and StatIM G4 2000, 5000
You’ll notice the difference on your first cycle!
Tips on Cleaning the Cassette - from Statim:
Keeping the Statim cassette clean is good clinical practice and assists in the function of the unit. SciCan recommends that the interior surface be cleaned at least once a week. Use dishwashing soap or a mild detergent that does not contain chlorine. Scrub the inside of the cassette with a cleaning pad designed for use with Teflon™ coated surfaces. After scouring, rinse thoroughly with water to remove all traces of the detergent. Cleaning the inside of your cassette is very important if you regularly sterilize lubricated instruments. Coating the entire inside surface with STAT-DRI / STAT-DRI PLUS drying agent induces water to form an even coat on the inside surface, without beading. The water in contact with the hot cassette surfaces also evaporates much more efficiently. Spotting is minimized and instruments dry much better. STAT-DRI / STAT-DRI PLUS should be applied every 10 cycles, and after every cassette cleaning.