Skip to content
Clean to Sterile Solutions
What Sets Us Apart
The StopLight Effect
Red: Deposit Waste Supplies
Yellow: Cleaning to Packaging
Green: Sterilization to Storage
Instrument Lubricants, Trays & Brushes
High Level Disinfectant Sterilant
Ultrasonic Cleaner Accessories
Ultrasonic Cleaner Monitors
Washers Disinfectors Accessories
Rinse Agents & Detergents
Labeling & Storage
Labelex Labels & Dispensers
C.I. Tape and Dispenser
Sterilization Tubing & Sealers
SteriLine Sterilization Centers
Automatic Tabletop Autoclaves
Manual Tabletop Autoclaves
Large Capacity Autoclaves
Class B Pre Post Vac
20% Off Refurbished Sterilizers
UV Decontamination Chamber
Dry Heat Sterilizers
Ethylene Oxide (EtO)
PCD's for Monitoring Sterilizers
Sterilizer Printers, Ribbons, SteriData Loggers
Services & Repairs
Rent Autoclave / Equipment Rental
Lease Autoclave / Equipment Financing
DuraCleanse Soap &
Dispensers & Stands
Hand Sanitizer, Hand Wipes, Hand Soap
Respirators & PAPR
Multi-Purpose Alcohol Wipes
Germicidal Instrument Cleaner
Decontamination for N95 Masks
COVID-19 Prevention Stations
UV Disinfection Solutions
PAPR vs. N95
COVID-19 Posters & Resources
How To Wrap Instruments for RapidHeat Sterilization
Instrument Washer Disinfector Steelco DS 600
Options: Single Door or Double Door for Pass-Through Application
Steelco DS 600 Washer Disinfector
A frontal loading, swing door washer disinfector, with a load capacity up to 8 DIN 1/1 mesh trays.
An integrated system for the validated treatment of instruments used in surgeries and sterilization centres.
The DS 600 is available in two versions: single door or double door for pass-through application.
Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of a manual transfer trolley.
The filtered forced hot air drying system ensures a perfect drying of all instruments and tubes after disinfection thanks to an efficient distribution of air on all chamber parts and wash cart levels.
High safety and easy to use soft touch control system on glass panel with LCD colour display to visualize cycle status.
20 standard pre-programmed cycles available and 20 additional cycles available for customization.
RS 232 port for printer connection to monitor and validate washing phases.
High visibility full glass door.
Filtered forced air drying system with adjustable time and temperature settings, helps to ensure the complete inside and outside drying of all the surgical instruments and tubes.
The built-in water softener provides optimal cleaning effectiveness.
Washing and DI disinfection temperature are fully adjustable up to 93°C. Temperature is monitored by two independent sensors.
Standard steam condenser eliminates vapours from entering into the washing area.
Heavy washing pump ensures high water flow rate combined with effective spray pressure.
Washing/drying injection system.
Inner cabinet, washing arms and tank filters entirely made of high quality AISI 316L stainless steel. Frame and body of machine made of AISI 304 stainless steel.
Triple water filtering system ensure to capture residue, preventing recirculation of contaminated material.
Two standard automatic liquid dispensers provided with level control.
Large storage on the basement to allocate up to three 5 lt (1.32 Gal US) chemical containers.
3rd and 4th Chemical dosing pump
HEPA H14 air filter
Integrated printer ST2
Light inside chamber
Sump steam heating
Additional chemical dosing monitoring
Analogic sensor on washing circuit for pressure check (registered data)
Boiler to pre-heat DI water (into fully dedicated bottom basement)
Outside Dimensions (W x D x H):
" x 25.98" x 66.34" (65
0mm x 660mm x 1685m
Volume Gal. / Liter ~ 58.12 Gal / 200 Liters
Basket volume ~ 44.90 Gal US / 170 Liters
Dimensions and Connections
Standard electrical connection (International)
Optional electrical connection (North America)*
208V/3~+N/60Hz or 480V/3~+N/60Hz
Permitted room temperature
+5°C/41°F - +40°C/104°F
up to 150 m3 /h - 5298 ft3 /h
* other electrical connections also available as optional
** with electrical heating elements - washing chamber steam heating configuration available as option
Steelco Sterilization Products and Instrument Washer Disinfectors
Steelco Washer Disinfector Products
Steelco Washer-Disinfectors are designed and constructed to comply with the latest European and UK guidelines on decontamination. EN ISO 15883-1/2, CEN ISO/TS 15883-5 and HTM 2030. Steelco Washer-Disinfectors are classified CE Medical Device (Community rule 93/42/EEC) code nr. 0051.
Share your knowledge of this product.
Be the first to write a review »