Home > Instrument Cleaning > Washers Disinfectors >

Instrument Washer Disinfector Steelco DS 610

Steelco DS 610 Instrument Washer Disinfector
 
 
Options: Front Loading or Pass-Through
Standard or Fast Cycle



Product Code: DS610
Request Quote
Description Technical Specs Literature
 
Steelco DS 610 Washer Disinfector - available in both Standard or Fast Cycle configurations

A larger model washer disinfector, with a load capacity up to 10 DIN 1/1 mesh trays.

Steelco DS 610 is a high capacity model, frontal loading or pass-through washer disinfector, with HEPA-filtered forced air drying distribution on double main for a perfect distribution on all chamber parts and basket levels.

The ergonomic design of the door level height allows the user a convenient loading/unloading job with the support of a manual loading/unloading trolley.

steelco fast cycleSteelco DS 610 is also available in Fast Cycle concept version, combining the energy saving concept with the highest standard of cleaning and drying performance in a very short cycle time.

Features:
  • High safety and easy to use soft touch control system on full glass panel with LCD colour display to visualize cycle status.
  • 20 standard pre-programmed cycles available and 20 additional cycles available for customization.
  • RS 232 port for printer connection to monitor and validate washing phases.
  • High visibility full glass door.
  • Washing and DI disinfection temperature are fully adjustable up to 93°C. Temperature is monitored by two independent sensors.
  • Heavy washing pump ensures high water flow rate combined with effective spray pressure.
  • Washing/drying injection system on the same circuit.
  • Inner cabinet, washing arms and tank filters entirely made of high quality AISI 316L stainless steel. Frame and body of machine made of AISI 304 stainless steel.
  • Triple water filtering system ensure to capture residue, preventing re-circulation of contaminated material.
  • Two standard automatic liquid dispensers provided with level control.
  • Large storage on the basement to allocate up to three 5lt (1.32 Gal US) chemical containers.
washers-sliding-doorOptional:
  • 3rd and 4th Chemical dosing pump
  • HEPA H14 air filter
  • Water softner (not for Fast Cycle version)
  • Integrated printer ST2
  • Light inside chamber
  • Sump steam heating
  • Basket recognition system
  • USB port
  • Analogic sensor on washing circuit for pressure check (registered data)
  • Additional chemical dosing monitoring - Ethernet connection
  • Boiler to pre-heat DI water (4,5 Kw power) - Conductivity sensor
  • Drain water heat exchanger (Fast Cycle version only)
  • 1S or 2S Fast Cycle versions (tot machine height 1960 mm / 77.16”)
  • Steam condenser (Fast Cycle versionsonly, total machine height 2390mm/94.09”)

Pass-through application
Steelco DS 610 SL, DS 610 and DS 600 in double door version are suitable for reducing cross contamination through the separation of dirty areas from the clean ones.

Share your knowledge of this product. Be the first to write a review »