Home > Brands >

Refurbished Midmark Ritter M11 Ultraclave Autoclave Steam Sterilizer, Current Model M11 020 \ -021 \ -022

Refurbished Midmark Ritter M11 Ultraclave
 
 
Price: $4,399.00

Price with Selected Options: $4,399.00


Product Code: RRMM11UNS




Data Logger

Yes [Add $500.00]
No
Printer

Yes [Add $500.00]
No

Qty:
Description Technical Specs Literature
 
Refurbished Midmark Ritter M11 Ultraclave

WARRANTY: 6 month parts and labor

Sterilization is easy with the Midmark M11 Autoclave. Just a few simple steps completes the process. Simply press the Start/Standby button and the Ritter M11 automatically fills with the correct amount of water. Select the cycle you want and the time is set for you. Cycle time from start to finish is 28 minutes (if cold) and 18 minutes (if hot) for unwrapped cycles.

Features:
  • Low water indicator light tells you when the reservoir level is too low
  • A door-ajar light tells you if the door is not securely closed
  • LED display shows the units temperature during heat-up and time remaining during cycles.
  • Lights turn on progressively during filling, heating, sterilizing, drying and complete stages.
  • Easy to fill and to drain water - located at the front of the machine
  • A large capacity water reservoir means you fill it less often!
  • Four stainless steel trays come with the unit (two large, two small)
  • Easy-to-read pressure gauge and electronic controls offer simple operation and reduce down time
Midmark Ritter M11 020 \ -021 \ -022
Features

Accessories
SteriData Logger Sterilizer Printer, Autoclave Printer, Paperless - Ritter / Midmark M9 / M11 NEW Series Midmark M9 Printer, Midmark M11 Printer Midmark M11 / M11D Door Gasket Tray Set for Midmark M11 Ultraclave
Sale Price: $745.00

Add
Price: $795.00

Add
Price: $82.50

Add
Price: $249.00

Add
midmark-steridata-logger-new Midmark M9 Printer, Midmark M11 Printer Midmark-m11-door-gasket tray-set-for-midmark-m11-ultraclave

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Autoclave for Christmas December 17, 2019
Reviewer: Valerie Deibler from Wyomissing, PA United States  
My Midmark M11 required some serious repairs and so I was able to trade it in and get the refurbished model with the data printer in its place.  Shopping and trading in were very easy.

Was this review helpful to you?