Home > Brands > Priorclave >

New Priorclave 200L Front Loading Steam Autoclave


Priorclave 200L Front Loading Steam Autoclave
 
 




Product Code: NPF200L
Get Quote

Description Technical Specs Literature
 
Priorclave 200L Front Loading Steam Autoclave

The Most Bang for Your Buck
Nearly twice as deep as the front-loading Priorclave 100L, the cylindrical-chamber 200L offers our best value in terms of cost per unit volume. This cavernous chamber is comparable to a conventional 16×16 rectangular autoclave vessel, making it a good fit for large labs and big research.

Many labs rely on common rectangular-vessel autoclaves produced for the medical market. But if you aren’t processing flat trays of medical instruments, then you don’t need a rectangular-chamber autoclave—and don’t want one. This is especially the case with large-volume front-loading autoclaves: By eliminating corners, cylindrical-vessel sterilizers improve steam circulation, preventing cold pockets. This decreases overall heating and cooling times while increasing reliability, assuring that every load is properly processed.

The cost-savings associated with moving to a cylindrical vessel sterilizer are also impressive. A lower part count, more efficient steam generation, and lighter-gauge pressure vessel don’t just reduce the purchase price: On an annual basis, a cylindrical-vessel front-loading autoclave can be expected to use 75% less energy and 87% less water than a comparable energy and/or water saving rectangular model, and spend far fewer days down for maintenance.

Every Priorclave front-loading autoclave ships with an advanced Tactrol control system. These controls are optimized for research tasks, with unparalleled cycle customization: One-touch operation, delayed cycle start, media warming, automatic cycle repeat, and more.
Features:
  • Steam Source: Electrically generated within the chamber
  • Operating Range: Up to 277°F, 32 psi (136°C, 2.2 Bar)
  • Working Dimensions: 19.5” (496mm) diameter x 40.2” (1020mm) deep
  • Chamber Material: Brushed grade 316L stainless steel
  • Door Material: Burnished grade 316L stainless steel

Priorclave front-loading autoclaves are built in the UK for years of trouble-free operation, even in the most adverse conditions. Their modular design is completely upgradable to meet your evolving needs. Each unit is designed for safe operation under all conditions, and fitted with the industry-favored Tactrol® 2 Control System. Priorclave autoclaves offer a 36-month limited parts and labor warranty, 20-year pressure vessel warranty, and unlimited technical support.

Safety

At Priorclave, the safety of your staff and students comes first. Our Quickseal 2 door, with Permission-based Door Release, is fitted with thermal and pressure locks to prevent opening at load temperatures above 80°C (176°F) and pressures above 0.2 Bar (2.9 psi) (as per BS 2646). The door is also fitted with a Redundant Safety Gate, so that any residual pressure can safely escape before the door can move freely (in accordance with the UK Health and Safety Executive’s note PM73). All units come with a Pressure Safety Valve set to 2.5 Bar (36.3 psi) and a 150°C (302°F) thermal cut out (per BS 6759); selected external panels and surfaces are thermally insulated. All front loading models have non-tip shelves.
Priorclave is the only manufacturer offering the same fully featured programmable control system on every model, from the smallest laboratory benchtop sterilizer to the largest industrial pass-through unit. The Tactrol 2 system puts every operating parameter within your control, with no re-training required as you move from one unit to another. Using our Tactrol 2 Control System, operators can limit user access to specific pre-programmed, validated cycles, via fail-safe one-button start or key switch activation. Program modifications are likewise key switch or password protected.

200L Front Loading Standard Features:
  • Quickseal 2 Single Action Lid Closure System
  • Permission-based Lid Release
  • Thermostatic Air Purge Valve
  • Low Water Cut Out (on models with in-chamber steam generation)
  • Electrically Operated Vent Valve
  • Fully Programmable Tactrol® 2 Control System
  • Automatic Timed Freesteaming
  • Assisted Load Cooling
  • Media Warming and Delayed Start
  • Chamber Pressure Gauge
  • Thermocouple Entry and Test Ports
  • 316L Stainless Steel Chamber and Door
  • Three Stainless Steel Loading Baskets
  • Caster mounted for ease of positioning and service
  • Biomaster Antimicrobial Surfaces
  • Reliable water and energy savings

Options:
  • Tactrol 5 Program Memory
  • Tactrol 10 Program Memory
  • Upgrade Tactrol 5 to Tactrol 10 Program Memory
  • Tactrol Self-Monitoring System
  • Tactrol Plain-Paper Printer
  • Setting Lock Key Switch (standard with any Tactrol memory unit)
  • Pulsed Free Steaming
  • Load Sensed Process Timing
  • Automatic Water Fill System (models with in-chamber steam generation only)
  • Water Softener
  • Purified Water Level Sensor (models with in-chamber steam generation only)
  • Stainless Steel Pipework
  • Dual Electric & Steam Heating
  • Clean Steam Generation
  • Air Intake Filter System
  • Exhaust Filtration System
  • Air Ballast System for Accelerated Liquid Cooling (with or without external air supply)
  • Load Temperature Monitor
  • Chamber Pressure Monitor
  • Armored Wandering Probe
  • External USB Port (included in North American models)
  • Combined Pre-Cycle Vacuum & Vacuum Cooling
  • Post-Cycle Vacuum Drying
  • Automatic Cycle Repeat
  • Stainless Steel Loading Basket
  • Stainless Steel Waste Container
  • Loading Hoist
  • Drain Condenser
  • Two-Year Spares Kit
  • Three-Year Spares Kit
  • IQ/OQ/PQ Documentation

Share your knowledge of this product. Be the first to write a review »